Pulsar PTX3067R Gen 2

• Please note, T51R housing option requires an extra 7 days handling time

• Recommended engine displacement 1.8 to 3.0 litres. Power outputs up to 650hp possible.

• Dual Ceramic Ball Bearing System

• 8 Blade Gen2 Billet Compressor Wheel with Extended Tapered Tip Technology

• Inconel 713c 10 Blade Turbine Wheel

• Gen2 Cover Integrated with the Speed Sensor Port

• V-Band Flange kit(s) for the exhaust housing included

• Max Air Flow rate: ~60 lb/min, rated @ 650 FWHP

• Standard or T51R mod compressor housing options available

• Supplied with manifold to turbine gasket and 5 bolt gasket (where applicable). Oil feed restrictor supplied (where applicable).  Oil drain fitting supplied

SPEC

• Compressor Wheel: 50*67mm

• Turbine Wheel: 60*55mm

• Compressor Inlet: 3″ Hose

• Compressor Outlet: 2″ Hose

• Turbine Inlet: T3, T4 or 2" V-Band

• Turbine Outlet: 3" V-Band(3.55″OD)

• Oil Feed: -4 AN connect to the Oil Restrictor

• Oil Drain: Std T3 Flange

• Water In/Outlet: M14*1.5

It's strongly recommended to run water cooling to aid reliability.